Self-healing materials can repair themselves by restoring their initial molecular structure after the damage and scientists from Evonik Industries
and the Karlsruhe Institute of Technology have developed a chemical crosslinking reaction that ensures good short-term healing properties of the material under mild heating.
The research uses the possibility of crosslinking functionalized fibers or small molecules by a reversible chemical reaction for the production of self-healing materials. These so-called switchable networks can be decomposed into their initial constituents and reassembled again after the damage.
The advantage is that the self-healing mechanism can be initiated any time by heat, light or by the addition of a chemical substance. "Our method does not need any catalyst, no additive is required," says Professor
Barner-Kowollik, who headed the KIT group.
It took about four years of research for the working group of Barner-Kowollik, together with the Project House Composites of Creavis, the strategic innovation unit of Evonik, to develop a novel polymer network. At comparably low temperatures from 50°C to 120°C, the network exhibits excellent healing properties within a few minutes. Reducing the time needed for healing and optimizing the external conditions, under which the healing process takes place, are the major challenges of research relating to self-healing materials.
Using the healing cycle developed by them, the KIT researchers have found a large number of intermolecular compounds that close again within a very short term during cooling. Mechanical tests, such as tensile and viscosity tests, confirmed that the original properties of the material can be restored completely. "We succeeded in demonstrating that test specimens after first healing were bound even more strongly than before," Barner-Kowollik says.
The self-healing properties can be transferred to a large range of plastics known. Apart from self-healing, the material is given another advantageous property: As flowability is enhanced at higher temperatures, the material can be molded well. A potential field of application lies in the production of fiber-reinforced plastics components for automotive and aircraft industries.